Best Cordless Robotic Pool Cleaners (2026): Top 8 Compared

The Aiper Scuba X1 is the mid-line model in Aiper's in-ground Scuba range, sold in the United States through Aiper's own online store. The published specification sheet rates the X1 for concrete, fibreglass, vinyl and tile pools of up to 2,150 square feet or 66 feet in length. It cleans the floor, walls and waterline.

Aiper lists a 6,600 gallons-per-hour pump, four motors, 14 sensors and dual active rollers at the front and rear. Its WavePath 3.0 navigation offers different routes for different pool shapes, and Aiper describes an adaptive path for bowl-shaped or irregular floors. Ultrasonic sensors are used to detect obstacles.

Filtration uses a 5 L top-load basket with two filters. The standard filter handles leaves and sand, and the MicroMesh ultra-fine filter is rated by Aiper for particles down to about 3 microns. Aiper recommends rinsing both after each use.

The battery is rated for up to 180 minutes, with a four-hour charge. The box includes a charging dock, a DC charger and a retrieval hook, and the robot weighs 24.25 lb. The Aiper app shows status, and the X1 receives over-the-air updates.

The Beatbot AquaSense 2 Pro is a cordless robot that Beatbot sells as a five-in-one cleaner. The five functions are surface, waterline, floor and wall cleaning plus water clarification. Beatbot rates it for pools of any common shape with up to 3,875 square feet of floor.

Navigation runs on a four-core processor and 22 sensors, two of them ultrasonic, and Beatbot uses the names CleverNav and SonicSense for the path planning and mapping. The company notes that mapping may fail in pools with strongly curved floors and walls. The pump is rated at 5,500 gallons per hour, and the robot has nine motors.

The 13,400 mAh battery takes about 4.5 hours to charge on the included dock. Beatbot's product page quotes up to 5 hours of floor cleaning, up to 5 hours of wall and waterline cleaning, and up to 11 hours of surface cleaning. After a cycle or when the battery is low, the robot parks at the surface and sends an app alert. The app can steer the robot only while it is at the surface.

The filter basket holds 3.7 L and uses two layers of 150 and 250 microns. The ClearWater system releases a clarifying agent that Beatbot says is made from crab shells, and the agent is bought separately. Beatbot gives a working depth of 0.5 to 3 m and a robot weight of 25.08 lb.

The WYBOT S2 Solar Vision is a cordless robot built around a solar-powered charging dock. When the battery falls below 20%, the robot returns to the dock on its own to recharge. It can also be charged from the supplied DC adapter, which WYBOT's manual rates at about three hours for a full charge.

The manual rates the S2 Solar Vision for pools up to 300 square metres, or 3,229 square feet, and 3 m (9.8 ft) deep. Runtime is 2.5 hours from a 5,200 mAh battery, and the flow rate is 3,962 gallons per hour. The robot weighs 8.5 kg (about 18.7 lb). The solar panel and station together weigh 12.5 kg. The manual also asks that the dock be installed where the water is at least 1.2 m deep.

WYBOT says the robot cleans the floor, walls, waterline, slopes and steps. Its AI Vision mode uses a camera to find debris, and WYBOT states that this mode works on the floor only. Weekly schedules can start the robot automatically. Filtration combines a 180-micron filter box with an ultra-fine sponge.

WYBOT's FAQ advises charging with the adapter for heavily soiled pools, since the solar dock may not supply enough energy for frequent cleaning. It also advises spacing scheduled cleans further apart where the dock gets limited sun.

The Dolphin LIBERTY 400 is one of Maytronics' cordless LIBERTY models for residential pools. In the United States it is sold through the Maytronics online store as a store exclusive.

Maytronics rates the LIBERTY 400 for pools up to 33 feet long. It cleans the floor, walls, waterline and sun ledge, and the product page describes cleaning at an 11 ft depth. Listed surfaces are liner, gunite and fibreglass, in rectangular, round, kidney and free-form pools, above or in the ground. The default cycle is 2.5 hours, and an Eco mode splits a single charge into shorter cycles across the week.

Charging uses Magnetic-Connect, which Maytronics describes as inductive charging. Filtration uses a top-access combined filter kit, and an ultra-fine filter kit comes in the box. An active brush scrubs the surfaces.

Click-Up is a sound-activated feature that brings the robot up to the owner for removal. The MyDolphin Plus app connects when the robot is out of the water. The robot weighs 17.861 lb, and Maytronics lists a three-year warranty. The store comparison table also shows the LIBERTY 600 at $1,729 and the LIBERTY 300 at $1,249 for buyers weighing other sizes.

The Dreame Z1 is the base model in Dreame's cordless pool robot range, below the Z1 Pro. Dreame sells it in the United States through its yard care online store.

Dreame rates the Z1 for up to 1,950 square feet of pool, cleaning the floor, walls and waterline. It lists a maximum suction of 8,000 gallons per hour and describes horizontal cleaning along the waterline. Navigation fuses ultrasound and 3D structured light to find boundaries. The Z1 detects the pool's shape and divides it into zones cleaned in S-shaped paths.

Four modes are offered: a global mode that cleans the floor and then the walls and waterline, plus floor-only, wall-only and waterline-only modes. They can be selected on the robot or in the Dreamehome app, but the app does not work while the robot is underwater. After cleaning, the robot parks at the pool edge for pickup.

Dreame quotes over 180 minutes of working time, with a footnote that the figure comes from its own lab test of floor cleaning in ECO mode. Charging uses a magnetic charger and takes four to six hours. Dreame states the Z1 is suitable for saltwater pools up to 5,000 ppm salt and 4 ppm chlorine.

The iGarden K Series is one cordless robot sold in four battery sizes: K36, K40, K70 and K90. iGarden ships US orders from US warehouses and sells through its own store.

The K36 is rated for pools up to 5 by 10 metres, and the other three for up to 6 by 12 metres. Full-coverage runtime is 2.25 hours on the K36, 2.5 hours on the K40, 3.75 hours on the K70 and 4.75 hours on the K90. Charging takes about 3.5 to 5 hours depending on the model, and battery capacity runs from 127 Wh to 242.8 Wh.

All four clean the floor, walls and waterline, and iGarden states they reach about 2 inches above the waterline. Modes are floor only, wall and waterline only, wall and waterline then floor, and full coverage, with cycles of 1, 1.5 or 2 hours or maximum. A Turbo mode and an AI Timer that repeats cleans every 24, 48 or 72 hours are also listed. Pump flow is 15 to 22 cubic metres an hour.

Filtration uses a 4 L basket with a 180-micron standard filter and a 50-micron ultra-fine filter, used alone or together. iGarden lists surfaces from concrete and vinyl to mosaic tile and stainless steel, in-ground or above-ground. The rated water depth is 1 to 2.5 m, and salt levels up to 5,000 ppm are supported.

The Seauto Crab is a lower-priced cordless robot from Seauto, which lists a customer service address in City of Industry, California. Its store also sells the newer SAT20, SAT25, SAT30 and SAT40 models.

Seauto rates the Crab for in-ground pools up to 2,150 square feet (200 square metres) and 1.6 to 16.4 feet (0.5 to 5 m) deep, with a supported pH of 7.0 to 7.8. It uses two brushless drive motors and one brushless pump motor. Seauto lists a flow rate of 80 gallons per minute and a moving speed of 60 feet per minute.

Front and rear PVC roller brushes scrub together, and Seauto says each set can work on its own. Filtration is a top-load 2.5 L basket with a 250-micron fine filter. Seauto describes infrared sensors for moving around obstacles and a horizontal waterline cleaning ability. The impeller can be removed to clear hair.

The 7,800 mAh battery gives an average of two to three hours per cycle and recharges in about three hours from the supplied DC charger. Seauto rates it for 500 charging cycles and says it can be replaced. The robot weighs 8.7 kg (19.2 lb), is rated IP68, and comes with a retrieval hook.

The Polaris FREEDOM is the cordless robotic cleaner from Polaris, whose US product support is handled through Fluidra. The US product page gives specifications but no price, and the owner's manual directs warranty service to the original dealer.

Polaris says the FREEDOM cleans the floor, walls and waterline in 2.5 hours or less. Two modes, floor only and floor plus walls and waterline, are chosen on the robot. The iAquaLink app adds a waterline-only mode and SMART Cycle, which works out a cleaning time for the pool. The app also shows charging status and sends a notice when a cycle ends. Polaris lists no scheduling.

The owner's manual rates the robot for in-ground pools 15 inches to 13 feet deep, with water between 55 and 95°F. The robot weighs 20 lb and uses a 9.6 Ah battery. A double helix brush pushes debris toward the inlet, and a 4 L canister with a transparent lid holds it.

The robot charges in under five hours on the Easy-Charge Station by direct contact. The manual asks for a GFCI outlet at least 11.5 feet from the pool, with no extension cord, out of direct sun and rain. At the end of a cycle the robot climbs to the waterline for pickup. Tapping it with a pool pole also makes it climb to the waterline, which Polaris calls Tap & Lift.